1. Start or return to a project
Create a project or open an existing saved project. Confirm the project context before changing the HPU configuration.
Product guidance
A practical path through the FLX-STD workflow
Use this overview to understand the sequence before starting. Signed-in users can open the detailed, task-based User Manual from inside FLUISTIX.
2. Configure the open-loop HPU
Work through the system, pump train and component inputs. Use descriptions and project information that will remain clear during review.
3. Generate and inspect
Generate the schematic, inspect each sheet and use the workspace controls to review the visible system state.
4. Review calculations
Check pressure, flow, speed, duration, line-size and power values. FLUISTIX supports the review; it does not replace engineering verification.
5. Refine with Q-Drop and redline
Use Q-Drop for supported manual schematic additions and redline tools to communicate intended changes before output.
6. Save the project
Save intentionally and confirm the project state before leaving the workspace or continuing on another device.
7. Prepare DXF outputs
Review the output state and exported documentation before release. Final approval remains the responsibility of the engineer.